"Bring A Friend" workday recap for Saturday, July 24, 2021
Our “Bring A Friend” workday on Saturday, July 24th was very productive. The first part of the crew arrived at about 6:45 a.m. with the rest arriving at our normal time of around 8:30 a.m. Check out the pictures below to see who the early risers where. A little hint. Two of them have four legs. The crew consisted of Ben, “Bob”, Gene, Norm, Calvin, Wes, Scott, David E, and special guests Eric and Bradley. The crew worked on connecting the east end of the new passenger line to the new gate crossing extending the passenger line nearly 200-feet then the crew added an additional 40-feet on the west side of the new man crossing. This allowed them to figure out the switch placement for the bypass. Once the switch is in place, we will have 75-feet of track to finish on the bypass and an additional 125-feet to connect the mainline at the station completing the passenger line project.
From the pictures you can see the crew also rented an excavator to help with the digging trenches to improve drainage in a couple of areas around the property. The crew installed drainage on the far west side of the yard heading towards the station and with pipe donated by our friend Bill Cross drainage was also installed in the unloading head out into the east loop area of the property.
Wes and Norm went back on Sunday to do some extra excavating. They focused on digging the two foundation areas for the shop containers and took care of a drainage issue around the pump station by rerouting the excess water that runs out of the pump so it will go down the hill and not into the driveway. This will help dry out the area so our next member container can be delivered.
The next scheduled workday will be on Saturday, August 7th with the focus being connecting the passenger line bypass and work on installing the deck boards for the man crossing. Be on the lookout for additional information as we get closer.
