MiniRailSolutions – Automatic Signals For Ride-on Railroads
The MiniRail Solutions signal system is designed to automatically control signals in response to trains detected on sections of track.
The system is specifically designed to fulfill the demands of automatic signaling required by “Full-Time Bi-Directional” railroads where engineers are able to go “anywhere at any time” (using turnout motors and multi-headed route signals) as opposed to the less demanding signaling required by uni-directional tracks for train separation only.
The MiniRail Solutions signal system is designed to automatically control signals in response to trains detected on sections of track.
The system is specifically designed to fulfill the demands of automatic signaling required by “Full-Time Bi-Directional” railroads where engineers are able to go “anywhere at any time” (using turnout motors and multi-headed route signals) as opposed to the less demanding signaling required by uni-directional tracks for train separation only.
Accu-Tie Machined #7 - 60' Radius Frogs
Accu-Tie has confirmed the machined frogs will work with the rail we use on our railroad. They currently offer #5 (32’ radius), #7 (60’ radius), and #9 (102’ radius) frogs. The picture below shows #7 frog being aligned with our rail. For the latest information here is a link to Accu-Tie: https://accu-tierailsystem.com/product/7-frog/
Accu-Tie has confirmed the machined frogs will work with the rail we use on our railroad. They currently offer #5 (32’ radius), #7 (60’ radius), and #9 (102’ radius) frogs. The picture below shows #7 frog being aligned with our rail. For the latest information here is a link to Accu-Tie: https://accu-tierailsystem.com/product/7-frog/
Micro Fasteners
Micro Fasteners' inventory of affordably priced socket screws, machine screws, locknuts, washers, sheet metal or self tapping screws, wood screws, other fasteners and related items in U.S. and metric sizes.
For many years hobbyists and engineers have relied on Micro Fasteners' inventory of affordably priced socket screws, machine screws, locknuts, washers, sheet metal or self tapping screws, wood screws, other fasteners and related items in U.S. and metric sizes.
The Home Machinist - Chaski Discussion Board
Live Steam & Riding Scale Railroad discussion board site.
Live Steam & Riding Scale Railroad discussion board site. You will find just about anything you can imagine regarding the Live Steam hobby here.
Discover Live Steam
Discover Live Steam is a marketplace website for both new and used equipment. The site features Steam Locomotive, Diesel Locomotives, Rolling Stock, and more.
Discover Live Steam is a marketplace website for both new and used equipment. The site features Steam Locomotive, Diesel Locomotives, Rolling Stock, and more.
Air Brake Parts
List of common parts needed for train brakes and more.
The information provided below are commonly used parts and vendors for those parts.
Quick Connect Assembly
1/8” hose to #10-32F
Part No: MQC-3 (multi-Barb)
https://www.clippard.com/part/MQC-3
Part No: MQC-3S (single-Barb)
https://www.clippard.com/part/MQC-3S
Or
1/8” hose to #10-32F
Part No: MQC-V3
https://www.clippard.com/part/MQC-V3
No Air Hose Connector Included
The following item needs to be purchased with any of the above options
Barb Hose Fitting
#10-32 to 1/8” ID Hose Fitting (multi-barb)
Pack of 10
Part No: 11752-3-PKG
https://www.clippard.com/part/11752-3-PKG
Or
#10-32 to 1/8” ID Hose Fitting (single-barb)
Pack of 10
Part No: 11792-4-PKG
Quick Connect Fitting (1/8” Hose)
Part No: MQC-F (mult-barb)
https://www.clippard.com/part/MQC-F
Or
Part No: MQC-FS (single barb)
Reusable Hose Clamp
Thread-On (Package of 10)
Part No: 5000-2-PKG
Brake hose - Polyurethan Hose
1/4” OD - 1/8” ID Black Solid
50’ Roll
Part No: URH1-0804-BKS-050
https://www.clippard.com/part/URH1-0804-BKS-050
Note: Other color’s available
Brake Cylinder
7/8” Bore S/S Cylnder, Stud Mount
Part No: SRR-14-1
https://www.clippard.com/part/SRR-14-1
Note: This is different than what Titan Train sells with brake kit.
Cylinder Hose Fitting
1/8” Pipe to 1/8” Hose Fitting
Pack of 10
Part No: 11924-1-PKG
https://www.clippard.com/part/11924-1-PKG
Note: If you use Mountain Car / Titan Train Brakes with an existing brake cylinder you may need a smaller version of this fitting.
Cylinder Hose Swivel Fitting
1/8” Pipe to 1/8” Hose Fitting
Pack of 1
Part No: SP0-4-PKG
https://www.clippard.com/part/SP0-4-PKG
Note: If you use Mountain Car / Titan Train Brakes this is what is shipped with Air Brake line kit.
“X” Coupling
10-32” X Fitting
Pack of 10
Part No: 15002-5-PKG
https://www.clippard.com/part/15002-5-PKG
Note: This is typical used to create Tee adapters with brake lines under rail cars.
Barb Hose Fitting
#10-32 to 1/8” ID Hose Fitting
Pack of 10
Part No: 11752-3-PKG
1/8” ID Hose “T” Fitting, ENP, Pack of 5
Part No: T44-4-PKG
https://www.clippard.com/part/T44-4-PKG
Note: This would be used as an alternative to making your own “T” connector using 10-32 “X” coupler + Barb Hose Fitting + Screw Plugs.
Brake Pressure Regulator with Handle and Gauge
Vendor: Tom Bee
https://tombeeonline.com/products/tom-bee-brake-pressure-regulator-with-handle
Note: Individual parts are available from Tom Bee Online.
Pressure Actuated Switch
Compressor On/Off
https://tombeeonline.com/products/tom-bee-shut-off-switch-fixed-65-psi
Braided Line
Part No: AAF-ALL46300-15
https://www.summitracing.com/parts/AAF-ALL46300-15
Note: This was used by some on the output of the compressor to the inline check valve. This was used because of heat causing plastic brake hoses to burst between the air compressor and the inline check valve.
Miracle Graphics & Railroad Products
Miracle Graphics & Railroad Products has been providing quality stock and custom decals since 2000, specializing in vinyl graphics for the large scale hobbyist.
Miracle Graphics & Railroad Products has been providing quality stock and custom decals since 2000, specializing in vinyl graphics for the large scale hobbyist.
